Send Email
Send SMS
Search
Labthink Instruments Co. Limited
Labthink Instruments Co. Limited


Ink and Printability Testing

Leading Manufacturer of seal strength tester, peeling strength tester, plastic film, textiles, paper tensile strength tester, portable heat seal strength tester, paper, plastic films tear strength test equipment and penetration tester for rubber stoppers from Jinan.

Seal Strength Tester

REQUEST CALLBACK

Seal Strength Tester
Ask for Price

We are among the reputed names in the industry offering Seal Strength Tester to our valued customers. The offered tester can perform creep test, burst test, and creep to failure test for a wide variety of materials like tubes, packages, bottles, etc. Being in compliance with the highest industry standards, these testers are highly appreciated by the customers. The offered testers can be operated in expansion restraining and expansion non-restraining modes.

Seal Strength Tester
is applicable in leakage detect for packages, bottles, tubes etc.

Seal Strength Tester can perform burst test, creep and creep to failure.

Seal Strength Tester conforms to ASTM F1140, ASTM F2054, ISO 11607, GB 18454,GB 19741,GB 10440, GB/T 1004,GB/T 1005, GB/T 17876.

Features:

  • Easy to operate, stable performance
  • Positive pressure principles
  • Two modes: Expansion restraining and Expansion non-restraining
  • Perfect LCD can show the parameters and results clearly
  • Special fixtures for various test modes

Technical Data:

  • Test range : 0-250KPa; 0-36.3psi (normal) 0-600kPa; 0-87.1psi (optional)
  • Gas resource pressure : 0.4MPa-0.9MPa

For more information, please feel free to leave us message.

Related products:
  • PARAMTM BMC-B1 Falling Dart Impact Tester
  • PARAMTM CHY-CA Thickness Measurement
  • PARAMTM MXD-02 Slip and Friction Tester
  • PARAMTM HST-H3 Heat Seal Tester
  • PARAMTM XLW(PC) Tensile Strength Tester
  • PERMETM OX2/230 Oxygen Permeation Test System
  • PERMETM W3/330 Water Vapor Permeation Test System
  • PERMETM VAC-V1 Gas Permeation Tester


Additional Information:

  • Item Code: PARAM-LSSD-01
Yes! I am Interested

Peeling Strength Tester

REQUEST CALLBACK

Peeling Strength Tester
Ask for Price

BLD-200N Peeling Strength Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, films and paper.

Basic Applications of Peeling Strength Tester
  • Tensile Strength and Deformation Rate
  • Tensile Strength at Break
  • 180 Degree Peel Test
  • 90 Degree Peel Test

Technical Specifications
  • Capacity Range 0~200 N (30 N, 50 N and 100 N are optional)
  • Accuracy 1% of reading value
  • Resolution 0.01N
  • Test Speed 50, 100, 150, 200, 250, 300, 500 mm/min
  • Specimen Width ≤30 mm
  • Stroke 500 mm

Related Products
XLW Tensile Strength Tester


Additional Information:

  • Item Code: BLD-200
  • Minimum Order Quantity: 1 Set
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Production Capacity: in stock
  • Delivery Time: 7 days after payment
  • Packaging Details: veneer case
Yes! I am Interested

Plastic Film, Textiles, Paper Tensile Strength Tester

REQUEST CALLBACK

Plastic Film, Textiles, Paper Tensile Strength Tester
Ask for Price

Tensile Strength Tester is applicable in the test of physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tape, adhesive bandage (plaster), release paper, protective film, flip off cap, foil, diaphragm, back sheet, non-woven, rubber and paper fiber, etc.

Tensile Strength Tester can perform the test items of tensile, peeling, deformation, tearing, heat seal, adhesive, puncture force, open force, low-speed unwinding force and unsnapping force, etc.

Tensile Strength Tester can do the test of tensile, tensile resistance and elongation ratio test, hot seal strength, tearing strength, 180 degree peel (include T peel), and 90 degree peel.

Tensile Strength Tester conforms to standards of ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, and ASTM F904, ISO 37, JIS P8113.

Features:
  • Professional testing items for packaging industry to realize quick functional tests.
  • Minicomputer control, LCD displays data, results and curves.
  • Seven independent testing programs, including tensile, peeling, tearing and heat seal, etc.
  • Data Memory function when power failure, overload protection, position limit protection and auto return.
  • Multi-functions of parameter set, printing, inquiry, clear and calibration, etc.

Technical Data:

  • Specification : 500N or 50N (optional)
  • Accuracy : ±0.5%of full scale reading
  • Test Speed : 50 100 150 200 250 300 500mm/min
  • Test Width : 30mm(standard clamp) 50mm(optional)
  • Stroke : 1000mm

Related products:
  • PARAMTM XLW(G6) Tensile Strength Tester with 6 test stations
  • PARAMTM XLW Tensile Strength Tester with 1% accuracy
  • PERMETM OX2/230 Oxygen Permeation Test System
  • PERMETM W3/330 Water Vapor Permeation Test System
  • PERMETM VAC-V1 Gas Permeation Tester


Additional Information:

  • Item Code: PARAM-XLW-PC
Yes! I am Interested

Portable Heat Seal Strength Tester

REQUEST CALLBACK

Portable Heat Seal Strength Tester
Ask for Price

PSST-100 Portable Heat Seal Strength Tester is designed for heat seal strength test of plastic films, composite films and other materials. This instrument is suitable for on-site quantitative inspection.

  • The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display which is convenient for the user to review the testing data and results
  • Professional software with functions of unit conversion, data query, probability statistics and normal distribution display
  • Power cord and chargeable battery as power supplies
  • Portable design for on-site inspection
  • Equipped with RS232 port which is convenient for the data transmission



Technical Specifications

Items Specifications
Capacity Range 0 ~ 100 N
Accuracy 1% of Reading Value
Resolution 0.01 N
Tensile Stroke 100 mm
Power Supply AC 220V 50Hz
Instrument Dimension 500 mm (L) x 165 mm (W) x 130 mm (H)
Net Weight 3.5 kg


Additional Information:

  • Item Code: PSST-100
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am Interested

Paper, Plastic Films Tear Strength Test Equipment

REQUEST CALLBACK

Paper, Plastic Films Tear Strength Test Equipment
Ask for Price

SLY-S1 Tear Strength Test Equipment is based on Elmendorf method to measure tear strength of plastic films, textile, woven and non-woven materials. Labthink tear strength test equipment is a user-friend instrument and test range is from 200gf to 6400gf with suitable pendulum.

SLY-S1 Tear Strength Test Equipment conforms to  ISO 6383-1-1983, ISO 6383-2-1983, ISO 1974, ASTM D1922, ASTM D1424, ASTM D689, TAPPI T414

Techncial Specificatioins
  1. Pendulum Capacity:  200 gf, 400 gf, 800 gf, 1600 gf, 3200 gf, 6400 gf
  2. Instrument Dimension: 480 mm (L) x 380 mm (W) x 560 mm (H)
  3. Power supply: AC 220V 50Hz
Yes! I am Interested

Penetration Tester for Rubber Stoppers

REQUEST CALLBACK

Penetration Tester for Rubber Stoppers
Ask for Price

Labthink tensile tester can be used for penetration test of rubber stoppers 

Features
  1. 7 test speed avaible
  2. special fixture customized 
  3. high accuracy
  4. professional software
  5. micro computer; LCD display 


Standards

This Tensile Tester conforms to ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904

Techncial Specifications

  1. Load Capacity: 500N
  2. Test Speed: 50~500mm/min
  3. Accuracy: 1% of reading value 
Yes! I am Interested

ASTM D5264 Ink Rub Tester for Printing Inks

REQUEST CALLBACK

ASTM D5264 Ink Rub Tester for Printing Inks
Ask for Price

Labthink provides ink rub tester for printing inks, e.g. ink layer or photosensitive (PS) coating. this instrument conforms to ASTM D5264, TAPPI T830.

This Labthink Ink Rub Tester has 4 test modes of dry rub, wet rub, wet transfer, and wet smear.

Technical specifications
  • Rub Pressure 8.9 N(2lb); 17.8N(4lb)
  • Rub Speed 21, 42, 85, 106 cpm
  • Rub Mode Arc Reciprocating Movement
  • Rub Times 0 ~ 999999
  • Number of Specimens 1 ~ 2


Additional Information:

  • Minimum Order Quantity: 1 Set
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Jinan
  • Production Capacity: In Stock
  • Delivery Time: within 7 days after payment
  • Packaging Details: Veneer Case
Yes! I am Interested

View PDF

ASTM D5264 Ink Rubbing Test Machine

REQUEST CALLBACK

ASTM D5264 Ink Rubbing Test Machine
Ask for Price

RT-01 Ink Rubbing Test Machine is professionally applicable to the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument conforms to ASTM D5264 & TAPPI T830.

This ink rubbing test machine could effectively analyze the problems of poor abrasion resistance, ink layer falling off, and bad hardness of coating layers of printed materials.

Technical Specifications
  • Rub Pressure 8.9 N(2lb); 17.8N(4lb)
  • Rub Speed 21, 42, 85, 106 cpm
  • Rub Mode Arc Reciprocating Movement
  • Rub Times 0 ~ 999999
  • Number of Specimens 1 ~ 2
  • Power Supply AC 220V 50Hz

Related Products

MCJ-01A Ink Rubbling Test Machine


Additional Information:

  • Item Code: RT-01
  • Minimum Order Quantity: 1 Set
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Jinan
  • Production Capacity: in stock
  • Delivery Time: 7 days after payment
  • Packaging Details: Veneer Case
Yes! I am Interested

View PDF

Digital Rub Tester For Printing Or Coating Layers

REQUEST CALLBACK

Digital Rub Tester For Printing Or Coating Layers
Ask for Price
Product Details:
Minimum Order Quantity1 Set
BrandLabthink
ModelRT-01
UsageLaboratory

Improved Digital Rub Tester
-- conform to ASTM D5264, TAPPI T830
-- Certified By ISO 9001, CE
-- Rub Pressure with 8.9N (2lb), 17.8N (4lb)

Labthink RT-01 Digital Rub Tester is professionally designed for the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument could effectively analyze the problems of poor abrasion resistance, ink layer falling off and poor hardness of coating layers of printed materials.

Features
  • 4 test modes of dry rub, wet rub, wet transfer, and wet smear
  • 4 different test speeds
  • Dual stations with arc movement structure
  • Intelligent design of power failure memory and buzzer reminding
  • controlled by micro-computer, with PVC operation panel, LCD

Technical Specifications
  1. Rub Pressure 8.9 N(2lb); 17.8N(4lb)
  2. Rub Speed 21, 42, 85, 106 cpm
  3. Rub Mode Arc Reciprocating Movement
  4. Rub Times 0 ~ 999999
  5. Number of Specimens 1 ~ 2
  6. Power Supply AC 220V 50Hz
  7. Instrument Dimension 485 mm (L) x 390 mm (W) x 230 mm (H)
  8. Net Weight 40 kg


Additional Information:

  • Item Code: LabthinkRT01
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Jinan
  • Production Capacity: In Stock
  • Delivery Time: within 7 days after payment
  • Packaging Details: Veneer Case
Yes! I am Interested

View PDF

Ink Abrasion Tester

REQUEST CALLBACK

Ink Abrasion Tester
Ask for Price

MCJ-01A Ink Abrasion Tester can be used to measure abrasion resistance of surface layers of printed materials(ink layer or photosensitive (PS) coating). It can analyze the problems of poor abrasion resistance, ink layer falling off, lower printable force, and bad hardness of coating layers of printed materials.

Ink Abrasion Tester is applicable to the test of Paper Printing Materials and Photosensitive Coating Layers

Technical Specifications
  • Rub Pressure 20 ±0.2 N
  • Rub Speed 43 cpm
  • Rub Area 155 mm (L) x 50 mm (W)
  • Rub Times 0 ~ 999
  • Specimen Size 230 mm (L) x 50 mm (W)

Related Products
RT-01 Ink Abrasion Tester


Additional Information:

  • Item Code: PARAM-MCJ-01A
  • Minimum Order Quantity: 1 Set
  • Production Capacity: in stock
  • Delivery Time: 7 days after payment
  • Packaging Details: Veneer Case
Yes! I am Interested

Ink Resistance And Scuff Test Instrument

REQUEST CALLBACK

Ink Resistance And Scuff Test Instrument
Ask for Price

Ink Resistance and Scuff Test Instrument is professionally designed for the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument could effectively analyze the problems of poor abrasion resistance, ink layer falling off and poor hardness of coating layers of printed materials.

This In Resistance And scuff Test instrument conforms to ASTM D5264, TAPPI T830

  1. Rub Pressure 8.9 N(2lb); 17.8N(4lb)
  2. Rub Speed 21, 42, 85, 106 cpm
  3. Rub Mode Arc Reciprocating Movement
  4. Rub Times 0 ~ 999999
Yes! I am Interested

Ink Rub Resistance Tester

REQUEST CALLBACK

Ink Rub Resistance Tester
Ask for Price
Product Details:
BrandLabthink
ModelRT-01
UsageLaboratory

Ink Rub Resistance Tester
 -- conform to ASTM D5264, TAPPI T830
 -- Certified By ISO 9001, CE
 -- Rub Pressure with 8.9N (2lb), 17.8N (4lb) 

Labthink RT-01 Ink Rub Resistance Tester is professionally designed for the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This Ink Rub Resistance Tester could effectively analyze the problems of poor abrasion resistance, ink layer falling off and poor hardness of coating layers of printed materials.

Features
  • 4 test modes of dry rub, wet rub, wet transfer, and wet smear
  • 4 different test speeds
  • Dual stations with arc movement structure
  • Intelligent design of power failure memory and buzzer reminding
  • controlled by micro-computer, with PVC operation panel, LCD 

Technical Specifications 
  1. Rub Pressure 8.9 N(2lb); 17.8N(4lb)
  2. Rub Speed 21, 42, 85, 106 cpm
  3. Rub Mode Arc Reciprocating Movement
  4. Rub Times 0 ~ 999999
  5. Number of Specimens 1 ~ 2
  6. Power Supply AC 220V  50Hz
  7. Instrument Dimension 485 mm (L) x 390 mm (W) x 230 mm (H)
  8. Net Weight 40 kg 
Yes! I am Interested

Piercing Force Instrument for Rubber Stoppers

REQUEST CALLBACK

Piercing Force Instrument for Rubber Stoppers
Ask for Price

Labthink Medical Packaging Tester can be used for piercing force measurement for rubber stoppers 

Feature
1. Micro computer; LCD dispaly
2. Professional software
3. Safety operations
4. Test Curve

Standards
This Medical Packaging Tester conforms to  ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904

Techncial Specifications
1. Load Capacity: 250N
2. Accuracy: 0.5% of FS
3. Stroke: 600mm
Yes! I am Interested

Rub Proofness Tester

REQUEST CALLBACK

Rub Proofness Tester
Ask for Price
Product Details:
BrandLabthink
ModelRT-01
UsageLaboratory

Owing to our expertise, we offer rub profaneness testers that are extensively used in several applications. Ideal for testing the ink/print, marking and rub resistance of cartons, films and commercial printed material.

This Tester is made in accordance to industry standards ASTM D5264, TAPPI T830. These qualitative rub proofness testers are perfect to be used in various applications across the domestic and international markets.

Techinical Specifications
Rub pressure: 8.9N (2lb); 17.8N (4lb)
Rub Speed: 21, 42, 85, 106cpm
Yes! I am Interested

Rub Resistance Tester

REQUEST CALLBACK

Rub Resistance Tester
Ask for Price
Product Details:
BrandLabthink
ModelRT-01
UsageLaboratory

Rub Resistance Tester of printed materials  is applicable in ink rub test of ink layer of materials like labels, folding cartons, corrugated boxes etc.

 

Rub Resistance Tester can help users to analyze the reasons of lower abrasion assistance, ink layer falling-off, lower printable of PS boards, and adhesion of coating layers of other products.

 

Rub Resistance Tester conforms to standards of ASTM D5264, TAPPI T830, JIS K5701 and GB 7706.

 

Features:
1. Applicable in dry or wet rubbing or scuffing, wet bleed, transfer, wet smear and functional tests
2. Arc moving model and double testing stations, high efficiency
3. Micro computer controls
4. LCD displays testing data
5. Simple "Set and forget" parameter preseting and memory
6. Buzzer prompts automatically when test is finished

 

Technical data:

1. Rubbing pressure: 8.9N(2lb), 17.8N(4lb)

2. Rubbing motion: to and fro arc motion

3. Number of cycles: 0-999,999

4. Rubbing speed: 21, 42, 85, 106cpm

 

Yes! I am Interested

Rub Tester

REQUEST CALLBACK

Rub Tester
Ask for Price

RT-01 Rub Tester is used to measure ink or coating rub abrasion resistance on printing materials, such as plastic films, paper.

This Rub Tester has four test modes of dry rub, wet rub, wet transfer, and wet smear with standards of ASTM D5264, TAPPI T830.

Technical Specifications
  1. Rub Pressure 8.9 N(2lb); 17.8N(4lb)
  2. Rub Speed 21, 42, 85, 106 cpm


Additional Information:

  • Item Code: Param RT-01
  • Minimum Order Quantity: 1 Set
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Jinan
  • Production Capacity: In Stock
  • Delivery Time: within 7 days after payment
  • Packaging Details: Veneer Case
Yes! I am Interested

View PDF

Scuff Tester

REQUEST CALLBACK

Scuff Tester
Ask for Price

Labthink provides Scuff Tester to measure scuff resistance of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating.

Labthink Scuff Tester could effectively analyze the problems of poor abrasion resistance, ink layer falling off and poor hardness of coating layers of printed materials.

Labthink Scuff Tester conforms to ASTM D5264, TAPPI T830

Features of Labthink Scuff Tester
  • 4 test modes of dry rub, wet rub, wet transfer, and wet smear
  • Dual stations with arc movement structure
  • Intelligent design of power failure memory and buzzer reminding ensure the safety of test operation
  • Controlled by micro-computer, with PVC

Technical Specifications
  1. Rub Pressure 8.9 N(2lb); 17.8N(4lb)
  2. Rub Speed 21, 42, 85, 106 cpm
  3. Rub Mode Arc Reciprocating Movement
  4. Rub Times 0 ~ 999999
  5. Number of Specimens 1 ~ 2
  6. Power Supply AC 220V 50Hz
  7. Instrument Dimension 485 mm (L) x 390 mm (W) x 230 mm (H)
  8. Net Weight 40 kg
Yes! I am Interested

Scuff or Rub Abrasion Tester for Printed Materials

REQUEST CALLBACK

Scuff or Rub Abrasion Tester for Printed Materials
Ask for Price

RT-01 Scuff or Rub Abrasion Tester for Printed Materials by a sutherlan rub tester. This Rub Tester conforms to ASTM D5264, and has a double rubbing postion. 

4 test modes of dry rub, wet rub, wet transfer, and wet smear and 4 different test speeds to meet different test requirements

The instrument is controlled by micro-computer, with PVC operation panel, LCD and menu interface, which is convenient for users to operate or view the test data

Technical Specifications 

Specifications RT-01Rub Pressure 8.9 N(2lb); 17.8N(4lb)Rub Speed 21, 42, 85, 106 cpmRub Mode Arc Reciprocating MovementRub Times 0 ~ 999999Number of Specimens 1 ~ 2Power Supply AC 220V  50HzInstrument Dimension 485 mm (L) x 390 mm (W) x 230 mm (H)Net Weight 40 kg 
Yes! I am Interested

Scuffing Or Rubbing Resistance Tester

REQUEST CALLBACK

Scuffing Or Rubbing Resistance Tester
Ask for Price
Product Details:
BrandLabthink
ModelRT-01
UsageLaboratory

scuffing or rubbing resistance tester of ink film on containerboard is applicable in ink rub test of ink layer of materials like labels, folding cartons, corrugated boxes etc.

 

scuffing or rubbing resistance tester of ink film on containerboard can help users to analyze the reasons of lower abrasion assistance, ink layer falling-off, lower printable of PS boards, and adhesion of coating layers of other products.

 

scuffing or rubbing resistance tester conforms to standards of ASTM D5264, TAPPI T830, JIS K5701 and GB 7706.

 

Features:
1. Applicable in dry or wet rubbing or scuffing, wet bleed, transfer, wet smear and functional tests
2. Arc moving model and double testing stations, high efficiency
3. Micro computer controls
4. LCD displays testing data
5. Simple "Set and forget" parameter preseting and memory
6. Buzzer prompts automatically when test is finished

 

Technical data:

1. Rubbing pressure: 8.9N(2lb), 17.8N(4lb)

2. Rubbing motion: to and fro arc motion

3. Number of cycles: 0-999,999

4. Rubbing speed: 21, 42, 85, 106cpm

Yes! I am Interested

Seal Strength Testing Instrument

REQUEST CALLBACK

Seal Strength Testing Instrument
Ask for Price

Seal Strength Testing Instrument-- for packaging seal strength testing 
-- use tensile tester
-- conform ASTM standards, Certified by ISo 9001, CE

Labthink XLW Tensile Tester can be used for seal strength testing for flexible packaging materials.

Features
  • 1% of full scale effectively
  • 7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packages
  • controlled by micro-computer with menu interface
  • Intelligent designs of over-travel protection, overload protection 
 
Technical Specifications
  1.  Load Cell Capacity 100 N, 200 N, 500 N (one of them is available)
  2. Accuracy 1% FS
  3. Test Speed 50, 100, 150, 200, 250, 300, 500 mm/min
  4. Number of Specimens 1
Yes! I am Interested

 
X


Labthink Instruments Co. Limited
Yarina Gao (Marketing Assistant)
No. 144, Wuyingshan Road ,
Jinan - 250 031, Shandong, China
Contact via E-mail
Contact via SMS



Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us   |   Mobile Site

© Labthink Instruments Co. Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Labthink Instruments Co. Limited