Lasting Adhesion Testing Equipment is designed and manufactured according to GB4851, compatible with ASTM D3654, and specially designed for adhesives, adhesive tapes, adhesive products and related industries. It is applicable in the holding power test of pressure sensitive adhesive tapes.
|Standard Roller||2000 g ±50 g|
|Weight||1000 g ±10 g (with load plate)|
|Test Plate||60 mm (L) x 40 mm (W) x 1.5 mm (D)|
|Timing Range||0 ~ 100 h (standard)|
|0 ~ 10000 h (optional)|
|Number of Stations||6|
1.Paste tape to steel panel
2.hung standard load on lower end
3.Keep status sometime
|Load Cell Capacity||20 KN|
|Accuracy||1% of reading value|
|Speed||5 mm/min ~ 50mm/min|
|Test Stroke||≤150 mm|
|Environment Condition||Temperature: 10°C ~ 40°C Humidity: 20%RH ~ 70%RH|
|Power Supply||AC 220V 50Hz|
|Instrument Dimension||1090 mm (L) x 610 mm (W) x 640 mm (H)|
|Net Weight||125 kg (including the weight of hydraulic oil)|
Primary Adhesion Testing machine / roll ball tack testermodel number: CZY-G
CZY-G Primary Adhesive Tester is applicable in primary adhesive tests of pressure sensitive adhesive tapes, adhesive bandage (plaster), label, protective films and other products.
Adopt rolling ball method to test the primary adhesive properties by testing the bond strength between adhesive specimen and steel ball.
It is mainly applicable in primary adhesive tests of pressure sensitive adhesive tapes, adhesive bandage (plaster), label, protective films and other products.
Adopt rolling ball method to test the immediate adhesive strength property. The test angle can be adjusted according to users’ test requirements. The test steel ball completely complies with standard to ensure the accurate test results. This tester satisfies standard GB/T4957.
This tester is used to test the adhesion retentivity of the tape adhered onto the test plate with rated load and rated time. Measure the sliding distance or record the time while it drops off during the rated time.
This test instrument conforms to the standards: GB/T 4851, ASTM D3654, JIS Z0237
Adhesion testing can be carried out on a range force and material testing systems which will depend on your application needs, force capacity, and the data you require from your test results. We have a wide variety of force gages, motorized force test stands, and material testing systems and software to meet your application needs.
u NLW-20 Adhesive Tensile & Shear Tester
This Instrument is professionally applicable to the determination of tensile, shearing, and pulling properties of various adhesives, which conforms to various ASTM standards ASTM D1002, ASTM D2095, ASTM D3165, and ASTM D2339.
u CZY-G Initial Adhesive Tester
This instrument is used to test the initial adhesion property of adhesive tapes. It is based on falling ball method and the initial adhesion property of adhesive taps could be obtained by observing adhesive effect occurred immediately after rolling ball and adhesive specimen come into contact.
This Instrument conforms to JIS Z0237.
u CZY-6S Adhesive tapes retention adhesive tester
This Instrument is used to measure the retention adhesion properties of adhesive tapes in a relative long time. The test plate with adhesive specimen is vertically hanged on the stand and its bottom is attached with a standard weight. The retention adhesive property could be obtained by measuring the displacement of specimen on vertical test plate or the time to failure at such load.
The Instrument has 6 work stations, which highly improved the efficiency of the testing. It is controlled by computer and timing is automatic finished.
u There is another instrument can be used to test the tensile strength and peel strength of adhesives, Labthink XLW Tensile tester. This is an universal testing machine, besides tensile test and peel test, it can also used for tear test, seal strength test for hundred kinds of materials.
For more information about adhesive testing/adhesion testing.